Скрытый текст: Показать In preparation, the boot loader [SPARK] to [Enigma] be changed:
- Unit at the main power switch at the rear
Appears to hold while turning the [OK] [FORC] in the display -
- Now select with the arrow key [V] now [ENIG] and confirm with [OK]
- Box flashes for a few seconds now
- Switch off when finished> Box
Flashing Enigma2/Neutrino:
- Folder [enigma2] Create a USB Stick
- Unzip and copy the files "e2jffs2.img" + "uImage" to the [enigma2] to the stick
- Stick to the unit where infected
- Hold on power, press [OK] to [FORCED] appears
- Now press the arrow key [>] for update from a USB stick> now the upload will begin to flash, as evidenced by [U LD] in the display
- The device boots then newly independent
to install the setup wizard, comes (suitable for Scart)
Picons, logos drinne
Oscam-ip drinne: 8888 call for webif
- Pre-configured for common card, simply activate its over webif
NTFS-recording and playback
Recording in TS format
Pearl Display
Teletext
-Tuxboxcomannder
Broadcast List
Sound set
Wlan activated in the kernel menu
Pingulux-Plus included remote control
Load newest image on a USB stick to copy the 2 files in folder "enigma2"
Image install
after neutrino is started appears the device wizard - you can almost always go on further.
Then I add an even that:
pressing menu - 1 - 2 - Modify your volume to about 10
pressing menu - 1 - 7 - Red button - Select Theme from Classic to Thomas8 (I myself use thomas4)
pressing menu - 1 - 7 - Volume: Top center, advanced color bar: a,
pressing menu - 1 - 7 - 1 - Level indicator (var & HDD): OFF, broadcast color: Currently, info bar at start of program: A
pressing menu - 1 - 7 - 2 - broadcast in color: Current
menu - 1 - 8 can Pearl display on / off to make another appearance, etc.
NTFS is recording
Fat32 recording goes
IP: 8888 enter, click on his card reader and turn active
Menu, then press 2, here you can neutrino restart or boot Spark
NEW: neutrino martiiGit FFTeam-by-31-10-2012
TIP: FAV button, custom programs and program eg ARDHD choose |